Professional Vinyl Flooring in Abbotsford and Fraser Valley

LVT and LVP are both types of luxury vinyl flooring, but they deliver very different aesthetic outcomes. Luxury vinyl tiles are designed to look like tiles — they’re similarly shaped and very often feature a classic tile effect. Luxury vinyl plank, however, is designed to closely resemble a traditional hardwood floorboard. A lot of customers prefer LVT in a bathroom or kitchen and LVP in a living space.

Vinyl plank flooring is completely waterproof thanks to a core component of wood plastic composite (WPC), stone plastic composite (SPC), or 100% vinyl. This makes it an ideal option for wood-look flooring in basements, laundry rooms, bathrooms, kitchens, and other areas of your house which can get wet and hum.

Vinyl flooring is generally easy to clean and maintain. Here are a few steps to follow for regular cleaning:

• Sweep or vacuum the floor to remove any loose dirt or debris.

• Mix a mild detergent with warm water in a bucket. Avoid using abrasive or strong cleaning chemicals, as they can damage the flooring such as vinegar.

• Soak a mop or sponge into the cleaning solution, wring out any excess liquid, and use it to clean the floor.

• Wipe the floor with clean water and dry it with a clean, dry mop or cloth.

• For tougher stains, such as oil or paint, use a specialized cleaner made specifically for vinyl flooring.

There are several ways to install vinyl flooring, but one of the most common methods is a floating installation. Here are the basic steps for a floating installation:

• Prepare the subfloor: The subfloor should be clean, smooth, and level. Any imperfections or uneven areas should be repaired before installing the vinyl flooring.

• Measure the room: Measure the length and width of the room to determine how much vinyl flooring you will need. Add about 10-15% to your measurements to account for waste and cutting.

• Lay out the vinyl flooring: Lay out the vinyl flooring in the room, allowing it to acclimate to the temperature and humidity for at least 24 hours. This will prevent shrinking or expansion after installation. You don’t need to cut open boxes.

• Cut and fit the vinyl flooring: Use a utility knife or a vinyl cutter to trim the vinyl flooring to fit the room. Leave a 1/4-inch expansion gap around the edges of the room to allow for expansion and contraction.

• Assemble the vinyl flooring: Align the planks or tiles and connect them according to the manufacturer's instructions. Usually, it is a click-lock system and no adhesive is required.

• Trim the edges: Use a utility knife to trim the edges of the vinyl flooring along the wall and door frames.

• Enjoy your new vinyl flooring!

It is recommended to get professional help to ensure that the installation is done properly and to get a better finish.

Vinyl flooring can be durable, but the durability of a particular vinyl flooring product can depend on a variety of factors, such as its thickness, quality, and level of wear-resistance (also known as wear-layer).

Vinyl flooring is composed of multiple layers and the thicker the wear layer on top of it, the more durable it will be. 6 mil (mil as in 1000th of an inch, not to be confused with millimetre) to 20 mil is recommended for residential, and 12 mil to 30 mil is recommended for commercial.

Vinyl flooring can withstand heavy foot traffic and is resistant to scratches, scuffs, and dents. It is also waterproof, making it a good option for rooms like bathrooms and kitchens. However, it can be damaged by sharp objects and excessive heat, so it's important to be mindful of these things.

In general, vinyl flooring is considered to be a durable, low maintenance, and cost-effective flooring option.

Here are a few steps for removing stains from vinyl flooring:

• Wipe off as much of the stain as possible with a clean, white cloth or paper towel.

• For mild stains, such as food or drink spills, use a solution of warm water and mild detergent. Dip a cloth or sponge into the solution, wring out any excess liquid, and use it to clean the stained area.

• For tougher stains, such as oil or paint, use a specialized cleaner made specifically for vinyl flooring. Follow the manufacturer's instructions for use.

• For tough stains that are not responding to basic cleaning methods, it is recommended to use a paste made of baking soda and water. Apply the paste to the stain, let it sit for a few minutes, then scrub the area with a soft-bristled brush. Please test it out on a scrap piece to ensure satisfactory result before applying on the actual floor.

• Rinse the floor with clean water and dry it with a clean, dry mop or cloth.

Here are a few steps for repairing small scratches or damages in vinyl flooring:

• Clean the affected area: Sweep or vacuum the area to remove any dirt or debris, then clean the area with a mild detergent and warm water.

• Cover small holes: If the hole is small, you can use a vinyl patching compound to fill it in. Follow the manufacturer's instructions for mixing and applying the compound, and then let it dry completely before walking on it.

• Replace a damaged tile or plank: If the damage is extensive, such as a large hole or a missing tile, it may be necessary to replace the damaged section. You can purchase a replacement tile or plank that matches the existing flooring, and then cut and fit it into place.

• Once the repair is done, clean the area again and let it dry before walking on it.

It is recommended to get professional help if you are not comfortable with the repair process, to ensure that the repair is done properly and to get a better finish.

Removing scratches from vinyl flooring can be challenging, but here are a few methods that may help:

• Use a vinyl floor repair kit: These kits typically include a colour-matching putty that can be used to fill in scratches.

• Apply a coat of furniture polish: Some people have had success using a coat of furniture polish to reduce the appearance of scratches. Be sure to use a polish that is safe for use on vinyl.

• Sandpaper: Sand the scratch with a fine-grit sandpaper, being careful not to sand too much and cause further damage.

• Scratch remover: There are special scratch removers available in the market that can be used to remove scratches from vinyl flooring.

Here are a few steps for removing adhesive from vinyl flooring:

• Scrape off as much of the adhesive as possible using a plastic scraper or putty knife. Be sure to hold the blade at a slight angle to avoid scratching the vinyl.

• Use a solution of warm water and mild detergent to soften the remaining adhesive. Dip a cloth or sponge into the solution, wring out any excess liquid, and use it to clean the adhesive.

• For tough adhesive residue, use a commercial adhesive remover or a mixture of equal parts white vinegar and warm water. Be sure to follow the manufacturer's instructions for use.

• For adhesive residue that is still difficult to remove, try using rubbing alcohol. Apply it to the adhesive with a cloth, and then use a plastic scraper to remove the adhesive.

• Once the adhesive is removed, clean the area again with warm water and mild detergent and dry it with a clean, dry mop or cloth.

It's important to test any method in an inconspicuous area before using it on the entire floor to ensure that it won't damage the vinyl.